Stage Truss Installation Requires Attention To Small Details

Skymear tells you how to install small details that should be noted from the stage truss.

The Aluminum Stage Truss installation has been completed, but some small details can not be ignored, what small details should be noted?

Here is a brief introduction to Stage Lighting Truss:

1. Make sure that all the stage frames and truss parts have a smooth surface and no flash or burrs.

2, must check the cutting and welding of the parts.

3. Degrease before painting, metal surface such as aluminum alloy stage frame or steel frame should be derusted and rust-proof measures should be taken.

4. The structural parts should be sandblasted and rust-proofed before painting, and all stage truss parts should be coated with primer, two coats, and painted topcoat according to the equipment instructions.

5. The damaged part of the coating should be repaired in time. The rusted part should be cleaned until the metal is bright and then painted correctly.

6. All welding should be handled clean and properly painted. When the inner surface of the tube and similar components cannot be painted, it is completely sealed at the end to prevent internal rust.

Our stage lighting truss systems can give you a great stage experience. If you want to learn more about our Stage Truss Systems, you can contact us further.